The best laser engraving acrylic sheets depend on your project size, color needs, and machine. KAITELA is best for larger colorful designs, while Deylixay offers a range of colors in 12-by-12-inch sheets. Bocolon’s two-tone sheets suit high-contrast labels and badges, and Adrattnay’s mirror sheets are a specialty choice for reflective designs. Compare the material and dimensions before buying, and confirm that the sheet is appropriate for your laser and operating setup.
| Product | Best For | Size And Pack |
|---|---|---|
| KAITELA Colored Cast Acrylic | Larger opaque projects | 12 × 16 inches, 10 sheets |
| Deylixay Colored Cast Acrylic | Color variety in square sheets | 12 × 12 inches, 12 sheets |
| Bocolon Gold/Black Engraving Sheet | Gold-look labels and badges | 11.8 × 11.8 inches, 5 sheets |
| Bocolon Black/White Engraving Sheet | Monochrome high-contrast marking | 11.8 × 11.8 inches, 5 sheets |
| Adrattnay Silver Mirror Acrylic | Reflective decorative projects | 8 × 8 inches, 3 sheets |
KAITELA Colored Cast Acrylic Sheets
These ten opaque cast acrylic panels measure 12 by 16 inches and are listed as 1/8 inch (3 mm) thick. The pack includes orange, red, rose red, yellow, green, light green, blue, lake blue, black, and white. The larger format is useful when a project needs more working area than a 12-by-12-inch sheet provides.
Best for: Makers who need larger sheets for signs, name tags, ornaments, or multiple smaller cutouts. The listing says the material can be processed with laser cutters and several conventional tools, including a CNC router. It recommends leaving the protective paper on during laser cutting for a clean finished piece.
Limitation: The listed colors are opaque, so choose another material if your design requires transparent or translucent acrylic.
Deylixay 12-Color Cast Acrylic Pack
Deylixay’s pack contains twelve 12-by-12-inch, 1/8-inch sheets, with one sheet per listed color. Colors include clear, red, pink, orange, green, yellow, blue, cyan, purple, black, white, and dark green. The manufacturer lists laser cutting and engraving among the processing options and describes the material as lightweight and shatter-resistant.
Best for: Craft projects that benefit from a broad palette in a consistent square size, such as badges, signs, decorations, and cake toppers. It was selected for its variety of colors and stated range of uses.
Limitation: The pack provides only one sheet of each color, which may not suit production runs that require repeated pieces in a single color.
Bocolon Gold And Black Engraving Sheets
This five-sheet pack is described as gold-and-black, two-tone laserable engraving material. Each sheet is listed as 11.8 by 11.8 inches and 0.05 inch thick. The product description highlights high-contrast permanent marks and says the sheets can be laser cut into different shapes. The listing identifies the material as ABS plastic.
Best for: Badges, office labels, and decorative pieces where a gold-look face and contrasting engraved detail are desired. Its two-tone appearance makes it a different option from solid-color cast acrylic.
Limitation: These sheets are thinner than the 1/8-inch acrylic options here. Check your project’s thickness requirements before choosing them.
Bocolon Black And White Engraving Sheets
This version of Bocolon’s two-tone laserable material has a black-and-white finish. The pack includes five sheets listed at 11.8 by 11.8 inches and 0.05 inch thick. The product description says engraving exposes a contrasting layer to create a high-contrast mark, and that the sheet can be laser cut to a selected shape.
Best for: Buyers making monochrome name badges, office labels, or signs that need clear contrast. Choose this over the gold-and-black option when a black-and-white appearance better fits the design.
Limitation: The listed material is ABS plastic rather than standard cast acrylic. Verify material suitability for your specific machine and intended use.
Adrattnay Silver Mirror Acrylic Sheets
This three-pack contains single-sided silver mirror acrylic sheets measuring 8 by 8 inches and 1/8 inch thick. The listing describes the sheets as compatible with CO2 laser cutting and engraving and notes that the reflective finish is on one side. It also states that edge lengths may vary by up to 2 mm.
Best for: Decorative projects that need a reflective surface, such as custom ornaments or display pieces. It was selected as a specialty alternative to opaque colored sheets.
Limitation: The 8-by-8-inch format is smaller than the other featured options, and the mirror finish is single-sided.
Buying Guide: How To Choose Laser Engraving Sheets
Should you choose cast acrylic or two-tone engraving material?
Cast acrylic is a versatile option for colorful cutouts, signs, crafts, and decorative pieces. Two-tone engraving sheets are designed to reveal a contrasting layer when engraved, which can make text and simple graphics stand out. In this selection, the Bocolon listings identify their material as ABS plastic, so do not assume every laserable sheet is acrylic.
What sheet size and thickness fit your project?
Match the sheet dimensions to the largest piece you plan to cut and the usable bed area of your machine. KAITELA’s 12-by-16-inch sheets offer the largest stated format here; the 12-by-12-inch options suit square layouts, while the mirror sheets are 8 by 8 inches. Thickness also varies: most featured acrylic options are 1/8 inch, while the Bocolon sheets are listed as 0.05 inch thick.
Does color or surface finish matter?
Choose opaque sheets for solid-color designs, and consider a mirror sheet when reflectivity is part of the intended look. For engraved labels, pick a two-tone color combination that provides the contrast your design needs. Protective paper can help protect surfaces during handling; follow the product’s instructions about whether to leave it on during processing.
What should you verify before cutting?
Check the sheet’s material, thickness, dimensions, and manufacturer-provided processing guidance against your machine’s requirements. Use the appropriate ventilation and safety procedures for your equipment and material. Do not treat products described broadly as “laserable” as interchangeable across all laser types.
Frequently Asked Questions
Can acrylic sheets be laser engraved?
Yes. The featured cast acrylic products are listed for laser engraving or laser cutting. Confirm the sheet and machine are suitable for each other before processing.
What thickness are most of these acrylic sheets?
The featured cast acrylic options are generally listed as 1/8 inch, or approximately 3 mm. The Bocolon two-tone sheets are listed as 0.05 inch thick.
Are all laser engraving sheets acrylic?
No. The Bocolon listings describe their two-tone sheets as ABS plastic. Check the stated material rather than relying on the phrase “laser engraving sheet.”
Which option is best for a large sign?
KAITELA offers the largest listed sheets in this selection at 12 by 16 inches. Check your design dimensions and machine work area before ordering.